Have you ever stopped to think about what it takes to keep hundreds or thousands of miners safe while they work underground? I hadn’t given it much thought until I started looking into AngloGold Ashanti’s workplace safety record.
Mining is one of the industries where a mistake can have serious consequences. A rockfall, equipment failure, or underground vehicle incident can put several lives at risk. Workers also face hazards that build up over time, including exposure to dust and other harmful substances.
What caught my attention was how much AngloGold Ashanti’s own reports reveal about the difficulty of improving safety. In 2007, the company reported 34 employee fatalities. It recorded 14 in 2008, then 18 in 2012. In 2019, it reported its first fatality-free year. But in 2020, six workplace fatalities were recorded.
That sequence tells an important story. Safety performance can improve significantly, but those improvements do not remove the risks permanently. A company still has to identify hazards, control them, check whether those controls work, and respond when something goes wrong.
I have looked through AngloGold Ashanti’s published safety reports to understand what changed over the years and what businesses can learn from its experience. In this article, I’ll explain what a mining safety management system involves, the hazards it needs to control, and how the same principles apply to mining and industrial businesses across Africa.
Let’s start with what the company’s safety record actually shows.
Key Takeaways
- A mining safety management system provides a structured way to identify workplace hazards, assess risks, and control them before people get hurt.
- AngloGold Ashanti reported 34 employee fatalities in 2007, 14 in 2008, and 18 in 2012. It recorded zero fatalities in 2019, followed by six workplace fatalities in 2020.
- A fatality-free year is an important achievement, but it does not mean the risks have disappeared. Businesses must keep monitoring their operations and checking whether safety controls work.
- Mining hazards include falls of ground, mobile equipment incidents, exposure to harmful dust, poor ventilation, and other risks linked to underground and surface operations.
- ISO 45001 provides an occupational health and safety management framework that organizations of different sizes and industries can implement, including mining businesses.
- Smaller mining and industrial businesses can apply the same principles by documenting their safety processes, assigning responsibilities, and reviewing incidents before they happen again.
How Has AngloGold Ashanti’s Workplace Fatality Reduction Record Changed?
I started with the company’s own reports because they provide a clearer picture of its safety performance over time. The figures are worth examining, but they need context. A reduction in fatalities is encouraging, while an increase deserves attention. Neither figure, on its own, explains everything happening across a mining operation.
In 2007, AngloGold Ashanti reported that 34 employees died in workplace incidents. The company’s report identified falls of ground as the primary cause of fatal accidents, accounting for 56% of the total. It also reported that 58% of those falls were related to seismic activity.
The following year, the number fell to 14 fatal accidents. That was a significant reduction from 2007, although every death remained a serious loss. The company discussed a new approach to safety and health management in its 2008 reporting.
But the improvement did not continue in a straight line. AngloGold Ashanti reported 18 occupational fatalities in 2012. The following year, that figure fell to eight. So, even within this period, the numbers moved in both directions.
Then came 2019. AngloGold Ashanti recorded zero fatalities across its operations, marking the first fatality-free year in the company’s history. Its all-injury frequency rate also improved to 3.31 injuries per million hours worked, compared with 4.81 in 2018.
That was a major achievement. However, the following year brought another setback. The company reported six workplace fatalities in 2020. Four occurred at its South African operations, which have since been sold, while two occurred at its Obuasi mine in Ghana.
The company also reported an improvement in its all-injury frequency rate, from 3.31 in 2019 to 2.39 in 2020. This is an important distinction. The frequency rate improved, but six people still lost their lives. A better overall injury rate does not cancel out the seriousness of those fatalities.
Looking at these figures together, I would not describe AngloGold Ashanti’s record as a simple story of continuous improvement. It shows progress, setbacks, and the difficulty of sustaining safer operations over time.
That is the part I find most important. A company can record a year without fatalities and still face serious risks the following year. Safety management has to continue through every shift, every change in equipment, and every new operating condition.
The question, then, is what helps a mining business manage those risks consistently.
Why Do Mining Fatalities and Illnesses Still Happen Across Africa?
One thing that stands out from the figures is that many mining accidents happen around hazards the industry already knows about. Rockfalls, moving equipment, falling objects and underground transport have been studied for years. Yet workers continue to lose their lives in incidents involving these same risks.
The International Council on Mining and Metals (ICMM) provides a useful picture of this challenge. Its 2024 report recorded 42 fatalities across 24 member companies. Nine involved mobile equipment and transportation, while five resulted from falls of ground. Seven of the nine mobile equipment fatalities occurred at operations in Africa.
The 2025 figures show that this problem has not disappeared. ICMM reported 39 fatalities across its membership, with 34 linked to four hazards: falls of ground, mobile equipment, working at height and inrush or outburst incidents. These figures cover ICMM member companies globally, not the entire African mining industry, but they show how persistent some of the industry’s most serious risks remain.
There is also a difference between identifying a hazard and controlling it properly. ICMM’s analysis of the 2025 fatal incidents found that ineffective execution of controls was the main control failure in 19 of the 26 incidents assessed. In other words, having a safety procedure or control written down does not guarantee that it will work when someone needs it.
The problem extends beyond sudden accidents. Some mining illnesses develop after repeated exposure to harmful substances over months or years. Silica dust is one example. When workers inhale respirable silica over time, it can cause silicosis, a lung disease that also increases the risk of tuberculosis.
The World Bank has documented the scale of this problem in South African gold mines. Its research estimated TB incidence among mineworkers at 2,500 to 3,000 cases per 100,000 people. It identified prolonged silica exposure, poor living conditions, and high HIV prevalence in mining communities among the factors contributing to the problem. These are historical estimates, so they should not be treated as current rates for every African mining operation.
This is why mining safety cannot focus only on accidents that happen during a shift. Businesses also need to consider occupational illnesses, exposure levels, medical surveillance, and the conditions that affect workers over time.
I think the important lesson here is that many of these risks are identifiable. The challenge is making sure the controls are appropriate, available, and consistently applied. That requires more than occasional safety talks or protective equipment issued at the start of employment.
It requires a system that connects hazard identification, risk assessment, daily work procedures, supervision, and regular checks. That brings us to the mining safety management system itself.
What Is a Mining Safety Management System?
A mining safety management system is the organized set of policies, procedures, responsibilities, and checks a mining business uses to protect workers from injury and work-related illness.
In practical terms, it gives the company a consistent way to identify what could cause harm, decide how to control it, and check whether those controls are working. It also establishes who is responsible for each part of the process, from the mine manager to the worker carrying out a task.
For example, consider a team working in an underground area where loose rock could fall from the roof. The business first needs to identify the risk and assess the conditions. It then establishes the required ground support, inspection routines, and restrictions on entering unsafe areas. Supervisors must check that the controls are in place, while workers need to know when to stop work and report a problem.
Without a system, these activities can become disconnected. One department may identify a hazard, another may issue instructions, and a supervisor may assume someone else has checked the controls. A management system brings those responsibilities together and provides records that show what was done.
AngloGold Ashanti’s published reports provide a practical example of how this can work. Its 2012 Sustainability Report described the use of hazard and risk management training, incident investigations, and control standards covering 20 risk areas. The company also discussed bow-tie analysis as a way to identify major hazards, the events that could trigger them, and the controls needed to prevent or reduce their consequences.
Its later reports describe more structured critical control monitoring. The company assigns responsibilities for checking whether important controls are present and working. It also uses the results to identify weaknesses before they contribute to another incident.
This is the kind of discipline a mining safety management system is meant to establish. The specific procedures will differ between an underground gold mine, an open-pit operation and a mineral processing plant, but the basic management approach remains similar.
Many organisations use ISO 45001 as the framework for building an occupational health and safety management system. It provides requirements for managing workplace risks, meeting applicable legal obligations, involving workers and improving safety performance. It applies to organisations of different sizes and industries, including mining.
However, a standard does not identify every site-specific hazard for a company. The business still needs competent people who understand its operations, the risks involved and the controls required to manage them.
So, what exactly should this system be designed to control?
What Hazards Must a Mining Safety Management System Control?
A mining operation can expose workers to several hazards at the same time. Some can cause immediate injuries or fatalities, while others can lead to illnesses that develop over a longer period.
The risks also differ depending on the type of mine, the minerals being extracted, the equipment in use and the conditions at the site. A safety management system must therefore start with the actual hazards present in the operation rather than rely on a generic checklist.
Here are some of the major categories.
1. Ground Control and Rockfalls
In underground mines, workers can be exposed to falling rocks, unstable roofs, collapsing walls and ground movement. These incidents can happen when the rock structure changes or when the support system fails to provide the required protection.
AngloGold Ashanti’s 2007 report identified falls of ground as the leading cause of its fatal accidents that year. The company attributed 56% of those accidents to this hazard, with seismic activity linked to 58% of the falls.
Managing this risk requires proper geological assessments, mine design, ground support and regular inspections. Where necessary, businesses also need monitoring systems that can detect movement and alert workers before conditions become dangerous.
2. Mobile Equipment and Transportation
Mining operations depend on heavy equipment such as haul trucks, loaders, excavators and underground vehicles. Workers can be struck by moving equipment, caught between vehicles and structures, or injured when machines overturn or move unexpectedly.
ICMM’s 2024 report recorded nine fatalities involving mobile equipment and transportation across its member companies. Seven occurred at operations in Africa.
Businesses need to manage how vehicles move around the site, separate pedestrians from equipment routes and establish safe operating procedures. Equipment maintenance, visibility, speed limits and communication between operators also matter.
3. Falling Objects and Work at Height
Workers can be injured by tools, rocks, materials or equipment falling from elevated positions. Falls from platforms, ladders and other working surfaces can also result in serious injuries or fatalities.
A business needs to identify where objects could fall and where workers could lose their footing. Appropriate controls may include secure storage, barriers, access restrictions, fall prevention systems and suitable protective equipment.
4. Dust, Silica and Other Respiratory Hazards
Drilling, blasting, crushing and transporting minerals can release dust into the working environment. Some dust contains respirable crystalline silica, which can damage the lungs when workers inhale it over time.
Depending on the mineral and process, workers may also encounter other airborne substances, including diesel exhaust and chemical fumes.
Controlling these risks requires identifying the substances present, measuring exposure and reducing the amount workers breathe in. Ventilation, dust suppression, enclosed equipment and suitable respiratory protection may all form part of the control measures.
5. Hazardous Energy, Machinery and Electrical Equipment
Mining equipment uses electrical, mechanical, hydraulic and pneumatic energy. Unexpected movement or the release of stored energy during maintenance can cause serious injuries.
For example, a machine that starts while a worker is repairing it can crush or trap someone. An electrical fault can also cause burns, fires or electrocution.
Businesses need procedures for isolating equipment before maintenance, checking that isolation is effective and controlling access to dangerous machinery. Workers must understand the risks before they carry out repairs or operate equipment.
6. Ventilation, Heat and Underground Air Quality
Underground workers depend on ventilation systems to maintain suitable air conditions. Poor ventilation can allow heat, dust, diesel exhaust and other harmful gases to accumulate.
In some mining environments, workers may also face extreme heat and humidity. These conditions can cause heat stress, fatigue and reduced concentration, increasing the likelihood of other accidents.
A safety management system needs to establish ventilation requirements, monitor air quality and provide suitable controls for heat exposure. Emergency arrangements must also account for changes in underground air conditions.
7. Chemical and Processing Hazards
Mining does not end when minerals come out of the ground. Processing activities can expose workers to chemicals, reagents, explosives and other hazardous materials.
The risks depend on the minerals being processed and the methods used. A chemical spill, incorrect storage or poor handling procedure can expose workers to serious harm.
Businesses need clear procedures for purchasing, storing, handling and disposing of hazardous substances. Workers also need appropriate training, access to safety information and suitable protective equipment.
These hazards show why a mining safety management system cannot rely on one general safety policy. Each major risk needs its own assessment, suitable controls and a way to check whether those controls remain effective.
One approach used in mining is bow-tie analysis. It maps the threats that could lead to an unwanted event, the controls designed to prevent that event and the measures that can reduce its consequences if it happens. AngloGold Ashanti has used this approach to assess major hazards and monitor critical controls.
The next step is understanding the lessons businesses can take from how the company applied these methods.
3 Lessons in Continuous Safety Improvement From AngloGold Ashanti’s Record
When I look at AngloGold Ashanti’s safety record, one thing becomes clear: reducing workplace fatalities requires more than setting a target and hoping the numbers improve. The company had to examine how accidents happened, understand the risks behind them and change how those risks were managed.
Its reports also show that the work continued after the company recorded zero fatalities in 2019. The six fatalities reported in 2020 are a reminder that safety improvements need constant attention. There are three lessons I think other mining and industrial businesses can take from this experience.
1. Understand the Risk Before Choosing the Control
In 2007, falls of ground accounted for 56% of AngloGold Ashanti’s fatal accidents. That figure tells us where a major part of the danger came from, but knowing the hazard is only the beginning.
The company later adopted bow-tie analysis to understand how major accidents could happen. This approach maps the threats that could lead to an unwanted event, the controls designed to prevent it and the measures needed to reduce the consequences if it happens.
For example, in an underground mine, unstable ground may create the risk of a rockfall. The business needs to understand what could cause that event, whether the ground support is adequate and how workers will be protected if conditions change.
I like this approach because it forces a business to look beyond the obvious hazard. It asks what could go wrong, how it could happen and what needs to be in place before anyone enters the working area.
2. Check Whether Safety Controls Are Actually Working
A company can have safety procedures, trained employees and protective equipment without knowing whether its most important controls are working as expected.
AngloGold Ashanti addressed this by introducing critical control monitoring. In its 2014 sustainability reporting, the company said its operations were monitoring more than 100,000 critical controls every month.
Each control had an assigned person responsible for checking its effectiveness. The company also identified how the control would be verified and how frequently those checks would take place.
Think about what that means in practice. If an underground working area requires ground support, someone needs to confirm that the support is installed correctly and remains effective. A procedure that simply says workers must use ground support does not tell management whether the required support is actually there.
This is where many businesses need to improve. They record that a safety procedure exists, but they do not always check whether people follow it or whether it controls the risk properly.
3. Keep Improving Even After the Numbers Get Better
AngloGold Ashanti recorded zero fatalities in 2019, but six workplace fatalities followed in 2020. That change shows why businesses cannot treat one successful year as proof that their safety system is complete.
The company has continued to develop its approach. Its 2023 Sustainability Report describes a four-layered health and safety risk assessment model. This includes assessments at different levels, from individual tasks and workplace activities to full-site assessments involving major hazards and bow-tie analysis.
The idea is to keep reviewing risks as operations, equipment and working conditions change. An assessment carried out several years ago may no longer reflect the conditions workers face today.
I think this is one of the most useful lessons for any business. When an incident happens, the investigation should identify what failed and what needs to change. Near misses, inspection findings and workers’ observations should also inform those decisions.
The same applies when the numbers improve. A business should still check whether its controls are effective and whether new risks have appeared.
These three lessons depend on a system that connects risk assessment, responsibility, monitoring and review. So what does a business actually need to put in place?
What Are the Core Elements of a Mining Safety Management System?
A mining safety management system needs several parts working together. Identifying hazards is important, but the business also needs to decide who manages each risk, what controls are required and how it will know whether those controls are effective.
The exact arrangements will depend on the operation. An underground gold mine will have different risks from a surface quarry or a mineral processing plant. However, the following elements provide a useful starting point.
1. Hazard Identification and Risk Assessment
The first step is knowing what could harm people at the site. This includes hazards linked to ground conditions, machinery, explosives, chemicals, dust, noise and the movement of vehicles.
The business then assesses the likelihood of each hazard causing harm and how serious the consequences could be. This helps management decide which risks need the most attention.
For example, a mine with unstable ground conditions may need more detailed geological assessments and ground support checks. A processing plant handling hazardous chemicals may need stronger controls around storage, handling and exposure.
2. Safety Policies, Objectives and Responsibilities
A safety policy explains the company’s commitment to protecting workers and managing workplace risks. But the policy needs to translate into clear responsibilities and measurable objectives.
Someone must be responsible for implementing each part of the system. Supervisors need to understand what they are expected to check, while workers need to know the procedures that apply to their tasks and how to report unsafe conditions.
Without clear responsibility, important safety activities can easily fall between departments.
3. Operational Controls and Safe Work Procedures
Once the risks are understood, the business needs to establish how work should be carried out safely. These controls may include engineering measures, equipment inspections, restricted access areas, maintenance procedures and rules for handling hazardous substances.
Take a machine undergoing maintenance. The company needs a procedure for isolating its energy sources, checking that the isolation is effective and preventing anyone from restarting the equipment while work is ongoing.
The important thing is that the controls must match the risk. Personal protective equipment may reduce exposure, but it should not replace stronger measures where the business can eliminate the hazard or control it at its source.
4. Training, Competence and Worker Participation
A safety procedure only works when the people expected to follow it understand what it requires. Workers need training that relates to their actual tasks, equipment and working conditions.
The business also needs to involve employees in identifying hazards and reviewing safety arrangements. Workers often notice problems that may not appear in management reports, especially when they carry out the same task every day.
Supervisors and managers also need the competence to assess risks and verify that controls are working.
5. Emergency Preparedness and Response
Even with proper controls, emergencies can still happen. A mine needs arrangements for incidents such as fires, ground collapses, equipment failures, gas releases and serious injuries.
This includes emergency communication, evacuation procedures, rescue arrangements, first aid and access to suitable emergency equipment.
Workers need to know what to do before an emergency occurs. The business should also test its arrangements through drills and review any weaknesses that emerge.
6. Monitoring, Incident Investigation and Corrective Action
A company needs a way to check whether its safety system is delivering the expected results. This involves workplace inspections, exposure monitoring, equipment checks, incident records and reviews of critical controls.
When an incident or near miss occurs, the business should investigate what happened and identify the underlying factors. It then needs to assign corrective actions, set deadlines and confirm that the changes have been completed.
This is also where critical control monitoring becomes useful. Instead of waiting for someone to get injured, management can check whether the measures designed to prevent serious incidents are working.
7. Internal Audits and Management Review
Regular audits help a business determine whether its safety arrangements are being followed and whether they meet the requirements it has established.
Management should then review the results alongside incident records, inspection findings, worker feedback and safety performance. The review helps identify areas that need more attention, additional resources or changes to existing procedures.
A safety management system should continue to develop as the operation changes. New equipment, new working areas and changes in production can all introduce risks that were not present when the original assessment was completed.
When these elements work together, safety becomes part of how the business plans and manages its operations. This is also the thinking behind ISO 45001, which provides a recognised framework for managing occupational health and safety.
How Does ISO 45001 Support Mining Safety in Nigeria?
For mining businesses in Nigeria, there are two things to consider when building a safety management system. The first is meeting the safety requirements that apply to their operations. The second is having a structured way to manage workplace risks and improve safety performance over time.
This is where ISO 45001 comes in.
ISO 45001 is an international standard for occupational health and safety management systems. It provides requirements for organisations to identify workplace hazards, assess risks, establish controls and monitor their safety performance.
It also places responsibility on leadership and requires organisations to involve workers in managing health and safety. This matters in mining because the people closest to the work often have a direct understanding of the hazards and the problems with existing controls.
For a Nigerian mining company, implementing ISO 45001 can help bring these activities into one organised system. Rather than treating safety inspections, training, incident investigations and emergency procedures as separate activities, the business can manage them through a common framework.
But ISO 45001 does not replace Nigerian mining laws.
The Nigerian Minerals and Mining Regulations 2011 contain specific health and safety provisions for mining operations. Part IV covers mine health and safety, including accident records, occupational health services, surface and underground workings, ventilation, machinery, transportation, personal protective equipment, mine fires and first aid.
For example, Regulation 140 requires the mine manager to maintain a register of accidents, dangerous occurrences and diseases. It also provides for incident reports and the submission of relevant records to the Mines Inspectorate Department.
Regulation 141 addresses the identification of potential health hazards in mining and exploration activities, together with proposed mitigation plans.
These requirements are important because a company cannot rely on an international management standard as a substitute for its legal responsibilities. It needs to understand and meet the requirements that apply to its mineral title, operations and workforce.
ISO 45001 helps provide the management structure for doing this. It gives the business a way to identify its legal obligations, assign responsibility, monitor compliance and review whether its safety arrangements remain effective.
Another point worth clearing up is that certification is not compulsory for every organisation implementing ISO 45001. A company can implement the standard without seeking third-party certification. If it wants formal certification, an independent certification body carries out the audit. ISO itself does not issue certificates.
For mining businesses, certification may help demonstrate that an occupational health and safety management system has been assessed against the standard. But the certificate alone does not prove that every hazard is controlled or that every worker is safe.
What matters is whether the system works in daily operations. A company still needs competent people, suitable equipment, effective controls and regular checks.
That is why I would encourage Nigerian mining businesses to look at ISO 45001 as part of a wider effort to manage workplace risks properly. The framework provides structure, while the people running the operation remain responsible for making it work.
What Does This Mean for Smaller Mining and Industrial Businesses?
Most businesses reading this article aren’t operating mines as large as AngloGold Ashanti’s. Some run small quarries, mineral processing facilities or workshops that support mining operations. Others work in manufacturing, construction and other industries where employees face physical risks every day.
But the same safety principles apply, regardless of the size of the operation. You don’t need thousands of employees before an unsafe process becomes a serious problem.
Think about a small quarry where workers operate crushing equipment. If the machine has a faulty guard, someone could get seriously injured. If the business has no inspection routine, that problem might remain unnoticed until an accident happens.
The same applies to a workshop where employees repair heavy equipment. If nobody checks whether machines have been properly isolated before maintenance, workers can be exposed to dangerous moving parts or stored energy.
These are problems a business can address without building a complicated management structure. It needs to identify the risks, decide how to control them and make sure someone is responsible for checking those controls.
I think smaller businesses sometimes make the mistake of treating safety as something they can deal with when they have more money or employees. But waiting until the business grows can leave workers exposed to risks that already exist.
You can start with the activities that carry the greatest risk. Identify what could go wrong, document how the work should be done and make sure employees understand the procedures. Then check whether the controls are working and correct anything that isn’t.
As the business grows, the system can grow with it. You can introduce more detailed procedures, additional monitoring and formal audits as the operation becomes more complex.
This is where a framework like ISO 45001 becomes useful. It gives a business a recognised structure for managing occupational health and safety without requiring every company to operate in exactly the same way.
The starting point is understanding what your business needs and building a system around those needs.
How to Implement ISO 45001 in Nigeria
If you’re running a mining or industrial business in Nigeria and want to implement ISO 45001, the process starts with understanding how your operations currently manage safety.
You don’t need to write hundreds of procedures before you know what is missing. In fact, doing that too early can create more paperwork without solving the problems workers face.
Here is how I would approach the implementation.
Start With a Gap Analysis
Before making changes, you need an honest picture of how your business currently handles occupational health and safety.
A gap analysis compares your existing arrangements with the requirements of ISO 45001. It looks at areas such as hazard identification, risk assessment, worker participation, training, operational controls and incident reporting.
For a mining business, it should also consider the legal requirements that apply to its operations under Nigerian mining regulations.
The result should show what already works, what needs improvement and what is missing entirely. This gives management a clearer idea of the work ahead.
Get Management to Commit
This is where many management system projects run into problems. Someone at the top approves the idea, but nobody provides the time, resources or support needed to implement it.
ISO 45001 requires leadership involvement. Management needs to establish the direction of the system, provide the necessary resources and make sure people understand their responsibilities.
This means appointing someone to coordinate implementation, involving supervisors and workers, and setting aside a realistic budget for training, equipment and improvements.
Without that commitment, the system can become another project that exists mainly on paper.
Identify Hazards and Build the Controls
Once you understand the gaps, the next step is to examine the risks across your operations.
Look at the activities workers perform, the equipment they use and the conditions under which they work. Identify the hazards, assess the risks and decide what controls are needed.
For a quarry, this might include vehicle movement, crushing equipment, falling materials and noise exposure. An underground mine would need to consider additional hazards such as ground instability, ventilation and underground transportation.
The controls should follow the level of risk. Where possible, eliminate the hazard or reduce it through engineering measures before relying on administrative procedures and personal protective equipment.
Document the System and Train Employees
The next step is putting the arrangements into a form people can understand and follow.
This includes the safety policy, risk assessments, operating procedures, emergency arrangements, training records and other documents needed to manage the system.
But documentation alone will not make the workplace safer. Employees need to understand the procedures that apply to their jobs and know what to do when they identify an unsafe condition.
Supervisors also need the competence to check that work is being carried out safely. Everyone should understand who to report to and what happens when a safety problem is identified.
Put the System to Work
Once the procedures and controls are ready, the business needs to use them in its daily operations.
This is where management can see whether the arrangements actually work. Are inspections taking place? Are employees following the procedures? Are supervisors checking critical controls? Are incidents and near misses being reported?
You should also keep records of what happens and use those records to identify recurring problems.
The system needs time to operate before an external certification audit. The business must have evidence that its arrangements are being implemented, monitored and reviewed.
Conduct Internal Audits and Management Reviews
An internal audit checks whether the business is following its procedures and meeting the requirements of the standard.
It can also reveal problems that routine inspections may not identify. For example, a procedure might exist, but employees may not understand it. A training programme may be scheduled, but the records could show that some workers have not completed it.
Management then reviews the findings, safety performance, incidents and outstanding actions. This helps determine what needs to change before the business proceeds to certification.
Decide Whether You Need Certification
After implementing the system, the business can decide whether it wants formal ISO 45001 certification.
Certification involves an independent audit by a certification body. The auditor assesses whether the organisation’s occupational health and safety management system meets the requirements of the standard.
If you’re considering certification, check the certification body’s accreditation and confirm that its approved scope covers ISO 45001 management system certification. In Nigeria, NiNAS is the national accreditation body, while other internationally recognised accreditation arrangements may also be relevant.
The Standards Organisation of Nigeria also lists ISO 45001 among the management system certification services it provides. You should still confirm the current accreditation status and scope before choosing a provider.
Certification is optional, so a business can implement ISO 45001 and benefit from its framework without pursuing a certificate. What matters first is having a system that works and protects people.
Frequently Asked Questions About Mining Safety Management Systems
Is ISO 45001 compulsory for mining companies in Nigeria?
ISO 45001 certification is not automatically compulsory for every mining company. However, mining businesses must comply with the health and safety requirements applicable to their operations under Nigerian law. They can use ISO 45001 as a framework for managing those responsibilities.
Can a small mining business implement ISO 45001?
Yes. ISO 45001 applies to organisations of different sizes and industries. A small quarry or mining business can implement a system that reflects its operations, workforce and risks. The amount of documentation and resources required will depend on the nature and complexity of its activities.
Does ISO 45001 guarantee zero workplace accidents?
No. ISO 45001 helps organisations identify hazards, control risks and improve occupational health and safety performance. It cannot eliminate every possible accident or guarantee that nobody will get injured. Its value depends on how effectively the business implements and maintains the system.
What is the difference between a safety management system and ISO 45001?
A safety management system is the organised way a business manages workplace health and safety. ISO 45001 is an international standard that sets requirements for establishing, implementing and improving an occupational health and safety management system. A business can have a safety management system without being certified to ISO 45001.
What happens if a company has ISO 45001 certification but workers are still getting injured?
Certification does not mean that every workplace risk has disappeared. A company must continue monitoring its operations, investigating incidents and checking whether its controls work. If workers are still getting injured, the business needs to investigate what is happening and take appropriate corrective action.
Conclusion
AngloGold Ashanti’s historical safety target shows why organizations need clear objectives and a way to measure progress. However, the work does not end when the numbers improve. New hazards can emerge, equipment can deteriorate and procedures may no longer reflect how work is carried out.
ISO 45001:2018 provides a framework for managing these changes. It helps organizations identify hazards, establish controls, involve workers and review whether their safety arrangements are effective. The standard cannot guarantee that accidents will never happen, but it gives businesses a structured way to manage workplace risks and improve their performance.
Safety Management Continuous Improvement Checklist
The important thing is to keep reviewing those measures and act when something needs to change. Every improvement matters because the people who work for your organization deserve to return home safely.





